Wholesale only · Fixed prices · Freight across the USA & Canada CAD · USD
EN ▾
Order list0

Buyer guides · November 20, 2026

Case Pack, Gaylord, Pallet or Truckload? How to Choose a Liquidation Lot Size

The same merchandise can be bought four ways. Here is how unit count, freight, storage space and risk change as lots get bigger — and which size suits which kind of reseller.

Most liquidation buyers start by choosing a category — tools, electronics, toys — and only later realise that the size of the lot matters just as much. The same returned power tools can arrive as a small carton, a tall gaylord box, a wrapped pallet or a full trailer. Each format changes what you pay per unit, what freight costs, how much room you need and how much risk you carry.

This guide walks through the four lot sizes we sell and who each one fits best.

The four formats at a glance

  • Case pack — a sealed master carton or small box of similar items. Easiest to store and the lowest total spend.
  • Gaylord — a large corrugated box (usually around 48 × 40 inches at the base) packed loose on a pallet. Holds many smaller or mixed items.
  • Pallet — merchandise stacked and shrink-wrapped on a standard 48 × 40-inch pallet, often still in retail boxes.
  • Truckload — a full 53-foot trailer, typically 22–26 pallets, for buyers with warehouse space and steady sales channels.

Every lot on our catalogue shows the approximate unit count, the estimated retail value and the cost per unit, so you can compare formats side by side.

Case packs: the low-risk starting point

Case packs suit new resellers, eBay and Facebook Marketplace sellers, and anyone testing a category before committing. Because the items are usually similar (for example one model of earbuds or one tool line), it is easier to research resale prices before you buy.

What to weigh:

  • Cost per unit is usually higher than in a pallet or truckload of the same goods.
  • Freight per unit is higher too, although a carton can often travel by parcel or be combined with other lots.
  • Fewer units means less room for one or two defective items to be absorbed.

Gaylords: volume without the full pallet stack

A gaylord is the classic "mystery box" format for smaller merchandise — phone accessories, cosmetics, small kitchen items, toys. Items are packed loose, so you get a high piece count in one footprint.

What to weigh:

  • Sorting takes time. Plan space and hours to open, test, clean and list items.
  • Contents are mixed by nature, so expect variety in brands, sizes and condition.
  • A gaylord ships as one pallet space, which keeps freight predictable.

Browse current gaylord lots to see typical unit counts.

Pallets: the reseller workhorse

Pallets are the format most store owners, flea-market vendors and bin-store operators buy repeatedly. Larger items — appliances, power tool kits, home goods — usually come this way.

What to weigh:

  • Cost per unit drops noticeably compared with case packs.
  • You need a way to receive a pallet: a loading dock, a forklift or pallet jack, or a liftgate delivery.
  • Buying two or more pallets on the same shipment usually lowers freight per pallet. Our shipping page explains how freight is quoted.

Truckloads: lowest cost per unit, highest commitment

Truckloads are for established buyers who move volume every week — bin stores, discount retailers, exporters and wholesalers who split loads for smaller resellers. See current truckload lots.

What to weigh:

  • The biggest total spend, and the most units to sell before your cash comes back.
  • You need dock access and warehouse space for 20+ pallets.
  • Delivery is scheduled directly with you as a full truckload (FTL) shipment.

How to choose: four questions

  1. How fast do you sell? Buy a size you can turn into cash within your normal cycle — a month is a common target for smaller sellers.
  2. Where will it go? Measure your storage space and check how you can receive freight before you order.
  3. How much sorting can you handle? Loose gaylords take more labour than boxed pallets of a single product line.
  4. Do you know the category? Start small in a category you have not sold before; scale up in categories you know.

Condition still matters at every size

Lot size does not change what is inside. Customer returns, overstock and shelf pulls behave differently whatever the format — returns need testing, overstock is usually new. Every lot page states its condition type, and our how it works page explains what each one means. Liquidation stock is sold as described and without guarantees on individual items, so price your resale plan with some allowance for units you cannot sell.

Ready to compare lots?

Filter the full catalogue by lot size and category, add the lots you want to your order list and either check out with a fixed price or request a quote if you want freight priced first. Questions about which size fits your business? Contact us and we will help you choose.

More guides